Audi R8 (Gen1) V10 (2009-2015) ECU Tuning Software (TCU Software Optional)
$1,495.00

Disclaimer: This product is not compliant with the California Air Resource Board and not for use on public roads in California. This applies to any aftermarket product that does not display a CARB EO#. Power ratings are subject to conditions and dynamometer model used. Learn more >  


Software tuning provided is designed around the stock vehicle. Any major changes in airflow components such as high flow cats or enlarged throttle body diameters may require custom tuning optimization which VF does not include or provide.

PRODUCT OVERVIEW

    Designation: Audi R8 V10 & V10 GT (2009-2015), 5.2L V10

  • DIRECT TO OBDII FLASH (all model years)
  • FLASH BACK TO STOCK

    HEX TUNING ECU Performance Software
    Expertly calibrated and extensively tested to provide noticeably improved throttle response with increased horsepower and torque, all while preserving your OEM like drivability and reliability.

     

     Burble tuning on Gen 1 R8s affects drivability as the functions are not present in the ECU from factory. As of August 2021 we do not offer it as it does not meet our performance standards.

     

    ECU Programming for the Gen 1 R8 V8/ V10 requires vehicle battery voltage to be maintained at 13volts or better with a 40A charger. Vehicle should not have aftermarket wiring connected with the CAN bus. Insufficient vehicle power will lead to programming faults and potentially damaged ECUs. VF engineering is not responsible for programming errors when installation instructions are not followed and labor charges will apply for ECU recovery.

    R8 V10
    +40-55whp
    +20-30wtq
    Speed limiter removed
    Improved throttle response
    User Switchable

    R8 V10 GT
    +15-25whp
    +10-20wtq
    Speed limiter removed
    Improved throttle response
    User Switchable


    TCU Software
    (2009-2013 R-Tronic)
    Quicker Shifts
    Increased Line Pressure
    *Optimized for HEX Tuning ECU
    *NOT compatible with other ECU Tunes

POWER & PERFORMANCE

    Mustang Dynos

    r8 v10 dyno ecu tuning by vf engineering gen 1 audi r8  hex tuning

     

    Burble tuning on Gen 1 R8s affects drivability as the functions are not in the ECU. As of Aug 2021 we do not offer it as it does not meet our performance standards.

INSTALL PROCESS

install at home using a windows pc

Requirements
  • Windows computer running Windows 7/ 8/ 10
  • OBDii Programming cable (included w/ purchase)

  • ECU Tuning Software (included w/ purchase)

  • Internet connection to send/ receive files

  1. Order online (shipping worldwide) 
  2. Use HEX Flash cable to read stock ECU data 
  3. Submit a software request to software.vfe1.com 
  4. Receive tuned filesFlash your car and have fun! 

PHOTOS & VIDEOS

    Pics coming soon

    Videos coming soon

REVIEWS 

Customer Reviews

Based on 12 reviews Write a review

Related Products

Disclaimer

Dealer/Consumer has educated and researched the pros and cons or modifying their vehicle with high performance parts such as superchargers. Customer understands that modifying their car bares certain risks including engine failure and both parties understand and agree to hold VF Engineering harmless of liability from installation and use of this product.

This product is not California Emissions Compliant or CARB approved. It is therefore NOT legal for use on public roads in the State of California or other states with similar laws. It is understood that you are installing this product / having specific labor performed on a pollution controlled vehicle. The dealer/consumer is not absolved of responsibility by means of ignorance and is hereby informed. By installing this product on your vehicle you assume all responsibility and consequences.

Supercharger Systems are considered special order, and not returnable without written consent by VF Engineering. Dealer is responsible for providing product disclosures/terms and conditions to their consumers.

Post installation of this product may require trouble shooting/diagnostics. Components and sensors near the limit of their wear tolerance may need replacement. VF-Engineering is not responsible for trouble shooting, diagnostic costs or consequential cost. The purchaser/reseller assumes the risks of modifying a used vehicle and educating themselves on the common traits of their platform. It is the reseller’s responsibility to educate the end user of these terms and conditions.

** Not CARB approved. Not legal for street use in State of California. For OFF-ROAD use only **